Ground Spike Base

From $360.00

Heavy gauge aluminium riser spigot. Couples with custom steel ground spike and adapter sleeve. Ideal for camping, park events & lawns of any type.

Dimensions

  • Depth: 400mm

Note: Hammer not provided

 

Fixed Position units (installation required):

F-220 / 280 / 330 / 400 in place on a Fixed 'Stalk' Spigot.

This has the following advantages: 

  • Lowest comparative price
  • 125mm OD footprint on the floor
  • The 'Stalk' spigot has no moving parts so there is no risk of (staff) user error
  • Staff and customers don't have the option to move / locate the Finbrellas so it can be optimised and 'set' for your beer garden
  • If the 'Stalk' spigot needs to be removed then the 3 x M12 bolts must be unscrewed from the ground

F-220 / 280 / 330 / 400 in place on a Fixed 'Camlock' Spigot.

This has the following advantages: 

  • 125mm OD footprint on the floor
  • The Camlock Spigot can be readily removed with a half turn of an 8mm Allan Key leaving only a 125mm OD x 8mm tall (with 4mm bevel) Fixed Camlock Plate (FCLP) fixed to the ground.
  • The FCLP poses no trip hazard risk
  • Multiple FCLP can be installed around the venue so the shade can be moved / optimised for events, afternoon sun, etc. 

Movable units: 

F-220 / 280 / 330 / 400 on Movable Ground Spike Base (MGSB):

This has the following advantages: 

  • Most cost effective 'movable option' ideally for soft ground eg; grassed / sandy areas
  • Can be transported and used at events, festivals, pop ups, etc

F-220 / 280 / 330 / 400 on Movable Paver Base (MPB):

This has the following advantages: 

  • Cost effective 'movable option' ideally for use under tables 
  • No installation required. 'ready to go' 
  • Movable by staff 
  • Can be transported and used at events, festivals, pop ups, etc

F-220 / 280 / 330 / 400 on Movable Low Profile Galvanized Steel Base (MLPB).

This has the following advantages: 

  • No installation required. ‘ready to go' 
  • Readily movable by staff and customers
  • Low profile bases (12mm) so negligible trip hazard
  • Can be transported and used at events, festivals, pop ups, etc
  • Reduced risk of user error by not tightening enough, over the MLPCLB

F-220 / 280 / 330 / 400 on Movable Low Profile Galvanized Steel Camlock Base (MLPCLB).

This has the following advantages: 

  • No installation required. ‘ready to go' 
  • Readily movable by staff and customers
  • Low profile bases (12mm) so negligible trip hazard
  • Can be transported and used at events, festivals, pop ups, etc
  • Compatible with other Fixed Camlock Base Plates (movable or fixed)